Two-Station Spot Taping Machine for Wire Coils and Long Bundles WM-464
The WM-464 tape-wraps wire coils and long bundles at fixed points on two independent stations — while one station winds, the operator loads the other, allowing loading to overlap the listed 10-second single-side wrap time. Actual output depends on handling and the wrap setup. It clamps coils from 500 to 2,500 mm total length with wrap-point center distances of 300 to 2,200 mm and up to 1,800 mm between taping points, carrying work up to 30 kg. Ring-style taping heads run tape up to 40 mm wide on standard 38 mm mandrel cores, banding motor coils, transformer windings and harness bundles without hand-wrapping fatigue.
Specifications
| Function | Two-station point (spot) tape wrapping of coils and bundles |
|---|---|
| Total coil length range | 500 – 2,500 mm |
| Coil center distance | 300 – 2,200 mm |
| Coil cross-section width | 5 – 25 mm |
| Coil cross-section height | 10 – 65 mm |
| Bobbin size | R90 – R150; radius or diameter convention and units confirmed on the quote |
| Max. coil weight | 30 kg |
| Tape width | ≤ 40 mm |
| Tape mandrel size | 38 mm |
| Single-side winding time | 10 s |
| Max. distance between wrapping points | 1,800 mm |
| HS Code | 8479.89 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Two stations overlap loading and wrapping — the machine is winding on one side while the operator stages the next coil on the other, the listed wrap time is 10 s, while actual output also depends on loading, unloading and the selected wrap setup
- Takes serious work — coils to 2,500 mm length and 30 kg that are tiring and inconsistent to band by hand
- Wrap points up to 1,800 mm apart are taped in one clamping, keeping long bundles straight instead of re-fixturing mid-part
- Ring taping heads accept standard 38 mm core rolls up to 40 mm wide, so tape is an off-the-shelf consumable, not a special order
What it processes
- Banding motor and transformer coils after winding
- Point-taping long harness bundles and cable looms at set intervals
- Coil sets and bobbin assemblies up to 30 kg in electrical equipment plants
Suited for: point-taping formed coils and long bundles — motor and transformer coils, bobbin assemblies and harness looms from 500 to 2,500 mm and up to 30 kg, banded at set positions on two alternating stations. Not suited for: continuous spiral wrapping — for that, pick the WM-4136 tape wrapping machine, the dedicated spiral station with no length limit — while loose short leads spot-tape on the WM-4105 bench taping machine.
Send 3–5 of your actual coils or bundles with the tape you use, and we clamp, wrap and film them at production pace before you commit — check the wrap tightness and point positions yourself.
Engineering knowledge
Choose and troubleshoot this process
- How to Choose a Wire Harness Taping MachineChoose harness taping equipment by harness geometry, tape material, overlap, branch handling, wrap length, tension control and production mix.
- Two-Point Taping of Small Wire Coils: Check the Fixture Before the MachineA small-coil taping application analysis: distinguish wire diameter from bundle size, check head clearance and define a two-band trial.
- Wire Harness Taping Defects: Causes and Corrective ActionsTroubleshoot tape gaps, excessive overlap, wrinkles, lifted edges, bundle deformation, tension variation and unstable start or finish positions.
WM-464 — common questions
What work envelope does the WM-464 cover?
Coils or bundles with a total length of 500 to 2,500 mm, wrap-point center distances from 300 to 2,200 mm and up to 1,800 mm between taping points, cross-sections of roughly 5 – 25 mm by 10 – 65 mm, bobbin size R90 – R150 and workpieces up to 30 kg. We confirm whether the bobbin notation denotes radius or diameter, and its units, on the quote.
Which tape does it run?
Standard rolls on 38 mm mandrel cores, any common taping material up to 40 mm wide — PVC, cloth and acetate harness tapes included. Each wrap point takes about 10 seconds per side at a set overlap.
What is it not meant for?
Continuous spiral wrapping along a full harness length, or taping loose short leads — it wraps discrete points on formed coils and bundles. For continuous and small-bundle taping, see the other machines in our tape wrapping category.
Related machines in Tape Wrapping
Automatic High-Temperature Tape Pasting Machine for Battery Cells up to 150 × 150 mm
Model WM-477
Automatic PTFE Thread Seal Tape Winding Machine for NPT and ZG Fittings
Model WM-461
Automatic Wire Harness Taping Machine for Bundles Φ3–30 mm
Model WM-467