Automatic Tube Cut-to-Length Machine for Hose, Conduit and Pipe up to Φ40 mm WM-582

🔊 Hear it run

›

▶

Get a quote for WM-582 →

The WM-582 is a floor-standing cut-to-length machine for tube and hose from Φ1 to Φ40 mm — corrugated conduit, PVC-coated flexible metal conduit, plastic and PVC pipe, silicone hose and similar profiles. A servo crawler feed pulls the tube through a roller guide, a 1 kW motor-driven rotating round blade cuts it square, and finished pieces leave on a conveyor belt, so a coil of tube becomes counted, bagged-ready lengths without an operator handling each cut. Output runs 20 to 40 pieces per minute depending on cut length. Batches are set on an English touchscreen. The machine measures 1,020 × 530 × 1,300 mm, weighs about 270 kg and runs on 220 V with 0.5–0.7 MPa shop air.

Specifications

Key features

• One machine covers a whole shelf of tube — soft silicone hose, rigid PVC pipe and PVC-coated flexible conduit all run on the same frame, with the cutting tool exchanged for the material instead of buying a second machine
• Motor-driven rotating blade shears through the wall rather than pinching it flat, so thick-wall hose and steel-cored flexible conduit leave the machine with a square, open bore
• Servo crawler feed grips over a long belt contact area — the tube is carried, not squeezed by two pinch wheels, which keeps printed and glossy jackets unmarked
• Conveyor belt outfeed drops counted pieces clear of the cutting zone, so one operator can load a coil and walk away instead of catching every piece by hand
• Free sample test — send us 2–3 m of your tube, we run it on this machine and send you the cut samples and the trial video before you order

What it processes

• Cutting corrugated loom and PVC-coated flexible metal conduit to counted kit lengths for electrical panels and wire harness lines
• Silicone, PVC and rubber hose cut-to-length for appliance, automotive and fluid-line assembly
• Plastic and PVC pipe prep in cable accessory, appliance and machine-building plants
• Contract packers supplying bagged, pre-cut tube sets to assembly customers

Suited for: mixed tube and hose cut-to-length work from Φ1 to Φ40 mm — corrugated conduit, PVC-coated flexible metal conduit, plastic and PVC pipe, silicone hose — where the shop runs several materials on one machine and wants counted pieces off a conveyor. Tolerance, its unit and the acceptance measuring method are confirmed on the quote.

Not suited for: bare copper, aluminum, stainless or armored metal tube, which needs the saw-type tooling of the WM-183 metal tube cutting machine (Φ1–30 mm). Heat shrink tube and soft sleeving cut faster and tighter on the WM-565N heat shrink tube cutting machine (up to Φ38 mm at ±0.1 mm, 60–210 pcs/min). High-volume corrugated loom in the 4–32 mm range belongs on the WM-177FY high-speed corrugated tube cutting machine with its enclosed pay-off. If the job is a continuous helical cut down a plastic pipe rather than cross cuts, that is the WM-571 spiral cutting machine; and braided sleeve or webbing that must leave the blade with heat-sealed, fray-free ends goes to the WM-576 computerized hot knife cut-to-length machine.

Cutting tools are exchangeable on this frame, so tell us the tube material, wall thickness and outer diameter in your inquiry — we quote the machine with the blade and guide set matched to your part, not a generic configuration.