Pneumatic Precision Wire Stripping Machine for 32–14 AWG Discrete Wires WM-1215C
The WM-1215C is a palm-sized pneumatic stripper for discrete wires from 0.03 to 2.08 mm² (32–14 AWG) with outer diameters up to 3.2 mm. Strip lengths run 1–20 mm, the specification lists 0.01 mm conductor-diameter steps (setting increment to be confirmed before ordering), and a strip cycle takes about 0.3 s on shop air. At 2.0 kg and 265 × 70 × 135 mm, it drops into any wire-prep station that already has a compressed-air line.
Specifications
| Function | Wire end stripping (semi-automatic, pneumatic) |
|---|---|
| Applicable wires | Discrete wires and small multi-conductor cables |
| Wire size range | 0.03 – 2.08 mm² (32 – 14 AWG) |
| Max. outer cable diameter | 3.2 mm (0.12") |
| Stripping length | 1 – 20 mm |
| Precision of diameter setting | 0.01 mm / 0.001" as listed; values are not equivalent — confirm setting increment before ordering |
| Cycle time | approx. 0.3 s |
| Dimensions (L × W × H) | 265 × 70 × 135 mm (10.4" × 2.8" × 5.3") |
| Weight | Net 2.0 kg (4.4 lbs); gross listed as 3.0 kg / 7.7 lbs — gross values conflict, confirm before ordering |
| HS Code | 8463.90 (common reference — final classification confirmed by your customs broker) |
| Certification | CE (certificate provided with shipment) |
Key features
- Pneumatic stroke finishes a strip in roughly 0.3 seconds — feed wires as fast as your hands can present them
- A micrometer-style dial adjusts conductor diameter; we confirm the setting increment and finished strip condition on your sample
- Covers the full 32–14 AWG (0.03–2.08 mm²) span without swapping blades
- 2.0 kg and 265 × 70 × 135 mm — sits beside a crimping press without crowding the bench
- Transparent blade guard helps limit access to the blade area while keeping the cut visible
What it processes
- High-turnover fine-wire preparation on harness lines that already run compressed air
- 32–14 AWG hook-up and signal wire in electronics and appliance manufacturing
- Discrete wires and small multi-conductor cables up to 3.2 mm outer diameter
- Sensor and signal leads where nicked strands mean rejects
Suited for: stripping fine discrete wire — 0.03–2.08 mm² (32–14 AWG), outer diameter up to 3.2 mm — at production pace on a bench that already has shop air, with strip lengths from 1 to 20 mm. Not suited for: anything thicker. It is the fine-wire sister of the WM-1216C pneumatic stripper: the WM-1216C takes 0.5–25 mm² power conductors with its universal V-blade, while the WM-1215C works below that range with a listed 0.01 mm diameter setting for signal wire, to be confirmed before ordering. It does not cut to length either — that job belongs to the automatic cut and strip machines.
Post us a handful of your production wires — we strip them on this exact machine, film it, and you decide with your own wire in the picture, not a demo lead.
Engineering knowledge
Choose and troubleshoot this process
- Laser vs Mechanical vs Thermal Wire Stripping: Which Process Fits?Compare laser, blade and thermal wire stripping by insulation, conductor protection, strip geometry and sample evidence before choosing equipment.
- WM-1215C vs Schleuniger UniStrip 2015: A Specification-Based ShortlistCompare published pneumatic stripping limits for WM-1215C and UniStrip 2015, then identify what matched wire trials must establish before replacement.
- Automatic vs Semi-Automatic Wire Processing EquipmentCompare automatic lines and semi-automatic wire-processing cells using batch size, changeover, process integration, inspection and labor content.
WM-1215C — common questions
What are the air supply requirements for the WM-1215C?
It is a purely pneumatic machine, so a compressed-air connection is required — any workshop compressor that already feeds a crimping bench covers a unit of this size, and we confirm the exact inlet pressure and fitting with your quotation. No air on the bench at all? The electric WM-1215D does the same fine-wire job from a power outlet.
How is it different from the WM-1216C pneumatic stripper?
They solve opposite problems. The WM-1216C is a 30 kg bench machine for 0.5–25 mm² power conductors; the WM-1215C is a 2 kg unit for 0.03–2.08 mm² fine wire with a listed 0.01 mm diameter setting, to be confirmed before ordering. Choose the WM-1215C for signal and hook-up wire, the WM-1216C for power cable cores.
Can it handle very short strip lengths?
Yes — stripping length adjusts from 1 mm up to 20 mm, and the machine is specifically built to process very short cables that are awkward to strip by hand.
Related machines in Wire Cutting & Stripping
Automatic Cable Cutting and Stripping Machine for 1–12 mm Sheathed Cable
Model WM-1306
Automatic Cable Middle Stripping Machine for 0.5–4 mm² Wire, 20 mm Insulation Window
Model WM-1217
Automatic Cable Cutting Machine for 1–150 mm² Wire, Cable and Hose
Model WM-1222