Automatic Cable Cutting Machine for 1–150 mm² Wire, Cable and Hose WM-1222

›

Get a quote for WM-1222 →

The WM-1222 cuts wire, cable, flat cable, soft copper busbar, sheath tube and PVC hose to length, covering conductor cross-sections from 1 to 150 mm² and material up to Φ33 mm. Sixteen belt-driven wheels feed the material without marking the jacket, cut lengths are programmed from 1 mm to 9,999,999.99 mm on a 7-inch true-color touch screen, and the same cycle can pull a front strip of up to 800 mm off the leading end. Length tolerance is quoted separately for the two material families — 0.002 × L on wire and 0.003 × L on hose — at up to 1,800 pieces per hour.

Specifications

Key features

• Rated for more than round cable — the specification lists flat cable, soft copper busbar, sheath tube and PVC hose alongside wire, so one bench covers the odd cut-to-length jobs that otherwise wait for a second machine
• 16-wheel belt feeding spreads the grip along the jacket instead of pinching it at one point, which is what keeps soft rubber and silicone sheaths free of roller marks on the way to the blade
• Front stripping to 800 mm in the same cycle — long enough for lug tails, busbar terminations and cable that has to enter a gland before it is terminated
• Two tolerance figures instead of one — 0.002 × L for wire, 0.003 × L for elastic hose — so you can judge the machine on the material you actually run
• Length programmed from 1 mm to 9,999,999.99 mm with batch and total counters on the 7-inch screen, with material accepted up to Φ33 mm

What it processes

• Power, welding and battery cable cut to length ahead of lug crimping or ferrule pressing, 1–150 mm²
• Cable shops and distributors breaking reels down into customer order lengths
• Flexible (braided) copper busbar cut to length before punching or lug pressing
• Sheath tube, PVC hose and flat cable cut in the same cell as wire, without a second machine

Suited for: cut-to-length production across mixed material — round power, welding and battery cable from 1 to 150 mm² and up to Φ33 mm, plus flat cable, soft copper busbar, sheath tube and PVC hose — where the leading end may also need a long strip of up to 800 mm.

For occasional cuts on cable up to Ø40 mm where no length programme is needed, the WM-1221 pneumatic thick cable cutting machine is a 35 kg bench shear with no feed system to set up.

Not suited for: work where both ends must be stripped in the same pass. For 10–150 mm² cable with 500 mm head and 300 mm tail stripping, use the WM-1450 thick cable cutting and stripping machine; for round cable up to 150 mm² at 5–23 mm outer diameter with 800 mm head and 150 mm tail stripping, the WM-165 round power cable machine is the closer match. Above 150 mm², see the WM-175 large gauge cutting and stripping machine (30–300 mm²). Fine hookup wire that needs both ends stripped at high piece rates belongs on the WM-167 benchtop cut and strip machine (0.1–10 mm², 3,000–8,000 pcs/h). And if you only ever cut hose, conduit and tube and never wire, a dedicated tube machine such as the WM-582 tube cut-to-length machine (Φ1–40 mm) is the cheaper cell — see the whole tube and pipe cutting range.

Special material can be accommodated against your sample: send 2–3 meters of the actual cable, hose or busbar and we will run it on this machine, film the cut and send you the pieces before you place the order.